| RIDGID
|
Threading Equipment
|
|
|
Model 600 Power Drive
|
|
|
Specifications
|
Motor
1/2 HP Universal 115V or 220V, 50-60Hz
Switch
Heavy-duty paddle-type switch with saftey lock off switch. Separate forward/reverse switch.
Gear Housing
Aluminum
Body & Handle
Durable heavy-duty fiberglass reinforced plastic.
Spindle Speed
32 RPM (No-Load)
Capacity
1/8" - 1 1/4" (3 mm - 32 mm) pipe.
Die Heads Included
1/2, 3/4, 1, 1 1/4 (Type 11R)
Weight
12 1/2 lbs. (5 1/2 kg) Power Drive only
Length
20 in.(51 cm)
|
|
Heavy-Duty Pipe Cutters
|
|
|
Specifications
|
Pipe Capacity
(18: 1/2 inch - 3 inch (13mm - 75mm)
Fitting Capacity
(18: 2 1/2 inch (62.5mm)
Weight
(18: 6.3 lbs (2.9 kg)
|
|
Features
|
Spring Loaded Jaw
One Handed Adjustment, Rapid Ratcheting Action
Unique Jaw Design
Aggressive tooth design for secure grip
Thumb Trigger
Easy Application and Removal
|
|
|
Manual Exposed Ratchet Threader Sets
|
|
All matched Threader/Sets include Die Heads, Ratchet Assembly, Ratchet Handle and Alloy Dies. All Threader Sets use same 12-R Dies in Die Head. Ratchet knob indicates forward and reverse. Die heads snap in from both sides and lock in place.
|
|
|
Manual Enclosed Ratchet Threader Sets
|
|
All matched Threader/Sets include Die Heads, Ratchet Assembly, Ratchet Handle and Alloy Dies. All Threader Sets use same 12-R Dies in Die Head. Ratchet knob indicates forward and reverse. Die heads snap in from both sides and lock in place.
|
|
|
Three Way Pipe Threaders
|
|
Each model cuts three thread sizes and uses 12-R ratchet threader dies.
|
|
|
Metal Carrying Case
|
|
Steel cases with rust-resistant finish available to keep die sets together.
|
|
|
Model 600 Power Drive
|
|
A hand-held, powerful, portable power drive.
Features a reversible 115V or 220V Universal motor.
Capacity 1/8" - 1 1/4" (3mm - 32mm) pipe. Designed for RIDGID 11R die heads.
Ideal for on-site applications such as gas line pipe installation.
CSA Approved
Approved to UL Standards (NRTLC)
|
|
|
Model 700 Power Drive
|
|
Heavy duty hand-held power drive.
Features reversible 115V or 230V Universal motor
Capacity 1/8" - 2" (3mm - 50mm) pipe. Designed for RIDGID No. 12R die heads. other RIDGID die heads (OOR, OORB, 11R) using adapters, threading 2 1/2" through 6" (62mm - 150mm) with 141/161 geared threaders
CSA Approved
Approved to UL Standards (NRTLC)
|
|
|
No. 65R-TC Receding Threader
|
|
Threads 1" - 2" pipe
True centering workholder
Jam-proof
Right-hand only
|
|
|
Thread Cutting Oil
|
Cools threads and pipe during operation
Speeds metal removal
Dark Oil
Traditional mineral oil with low odor and anti-mist formulation
Nu-Clear Oil
Clear mineral oil with low odor and anti-mist formulation. Special low temperature properties maintain workable viscosity to -20oF.
Stainless Steel Oil
High performance mineral oil formulated to produce superior quality threads on stainless steel and black pipe.
|
|
|
No. 418 Oiler
|
The new Model 418 hand-held oiler is sturdier than ever before. The 418s pump assembly and heavy-duty reservoir are designed to increase productivity.
Pump Assembly
50% more oil per stroke than any other hand-held oilers for longer die life.
An ergonomic 2-finger trigger design that reduces user fatigue.
Die cast heavy duty body with swivel nozzle with no exposed parts for longer life.
Convenient anti-slip grip design with integral hook for easy hanging.
Heavy Duty Reservoir
The new 418 oiler features a patent pending fastenerless twist and lock drip pan that easily locks in place
The new material withstands abrasion, is lighter than metal and does not rust
The new reservoir will not crack or leak
The new material is so strong that under normal use, no dents will form on impact or shape changes will occur over time. As a result, the drip pan will fit squarely on the reservoir time after time
Intergrated molded body eliminates leaks at the hose-reservoir connection.
|
|
|
819 Nipple Chuck Kit
|
|
Holds short or close nipples for threading
Holds studs for threading
For use with 300 Power Drive, 300 COmpact, 535 and 1822 (with adapter kit) and 1224 threading Machines
Standard Nipple Chuck includes insert and 5 adapters: 1/2 ", 3/4 ", 1", 1 1/4" and 1 1/2" (Nipple Chuck body serves as 2" Adapter)
|
|
|
Pipe Dies
|
Beveling Dies
For beveling pipe prior to welding. A set of beveling dies consists of three guide segments and one cutting segment.
Grooving Dies
To groove pipe for mechanical type couplings.
|
|
|
Machine Stands
|
Three stands are available to satisfy every operational requirement
Model 100A
Model 150A
Model 200A
|
|
|
Model 535 Threading Machine
|
The Model 535 maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir makes the 535 ideal for longer uninterrupted threading. The 535 features a high clearance carriage makes the threading operation easier and a generous top is designed around maximum uptime with the upgrades that matter most to the pipe working professional.
Users also benefit from the part commonality between the 535, the 535A Automatic and other RIDGID branded equipment.
|
|
|
Model 300 Compact Threading Machine
|
|
Heavy-duty proven performance
Lightweight, portable design
Fast transport and set-up
Self-contained oil system with adjustable flow control
Versatility for threading and grooving
Quiet Operation
CSA Approved
Approved to UL Standards (NRTLC)
|
|
|
Model 1224 Threading Machine
|
|
Threads 1/4" - 2" pipe at 36 RPM and 2 1/2" - 4" at 12 RPM
The 1224 threads a wide range of pipe including black, galvanized and plastic coated pipe, together with stainless steel, IMC and heavy-wall conduit, was well as rod up to 30 Rockwell C.
An induction motor insures sound levels well within the limits set by the regulating authorities.
A special capacitor-start/capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.
1/4" - 2" Universal Die Head; 2 1/2" - 4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads
Constant and proper lubrication of dies and workpiece with through-head oiling.
CSA Approved
Approved to UL Standards (NRTLC)
|
|
|
Nos. 141/161 Geared Threaders
|
|
141 threads 2 1/2", 3", 3 1/2", 4" pipe with one set of dies
161 threads 4", 4 1/2", 5", 6" pipe with one set of dies
Jaw clutch prevents jamming
Simple adjustment for tapered or straight threads
Cam-type workload sets instantly
Fully enclosed gearing
Right-hand only
|
|
|
Die Heads
|
Model 811A
Model 815A
Model 531
Model 532
Model 816
Model 817
|
|
